5 L-Shape Modular Home Designs You will Fall in Love with (2024)

FAQs

How to make a mobile home not look like a mobile home? ›

Add a Higher Roof Pitch & Eaves

The pitch of your mobile home's roof can be improved in both looks and functionality. Your mobile home will resemble a traditional house more if the roof pitch is higher, and it will also make snow and rain more easily slide off.

Adding wider eaves in addition to a higher roof pitch can help the outside of your mobile home look more like a house. Another way to make your mobile home's exterior look more like a traditional house is to install larger doors.

Modular homes are built specifically to be placed on a basem*nt or crawl space foundation, also known as perimeter permanent foundation. It can be a block or poured wall foundation. It cannot be placed on a slab foundation because the home needs to have a way to fasten to the foundation.

A manufactured home will generally have a metal frame while a modular home will typically have a wood frame. However, the metal frame of a manufactured home may not be visible if it has been placed on a permanent foundation and skirted to look as though was a "stick-built" home constructed on site.

Additional disadvantages to mobile homes have to do with them typically being located in a mobile home park. Despite "owning" your actual home, you will still have a landlord, to whom you will have to pay rent and answer to for your compliance with park rules.

Slab foundations are one of the most affordable foundation options for manufactured homes. Slab foundations are typically quick to construct. You can use slab foundations in seismic areas.

Mobile homes are constructed upside-down – or at least the floor is. The floor joists are nailed together, the ducts and water lines are attached, a thin layer of insulation is draped over the entire floor and a cover (the belly wrap) is installed. The steel frame is attached.

The first thing to consider when building a modular home is the foundation. A modular home cannot be built on a slab because all the pipes and air ducts are installed below the home.

Are modular homes walls thin? ›

Additionally, modern modular homes are build with 2 x 6 framing for walls which allows for much more insulation to be placed within the wall. If you pictured a thin, flimsy modular home, this couldn't be further from the truth.

Slab Foundation

Provides resistance to floods, frost, seismic areas, and wind. Provides a clean, dry area under the home. When combined with piers, this foundation provides the most support for your home.

On-frame modular homes have a permanent steel-beam chassis. Off-frame modular homes are lifted by a crane off the transportation carrier and placed on a foundation. Both can be placed on permanent foundations.

Many manufactured homes are built with wall sections or panels that make building the home more efficient because assembling and transporting it is easier. To cover the seams between these pre-finished, vinyl-covered wall panels, Clayton uses batten strips.

Manufactured homes usually use vinyl-on-gypsum (VOG) wall panels rather than standard drywall. Instead of using tape to cover the seams, as is done with drywall, the joints are covered with batten strips during assembly.

Modulog log siding replaces the standard profile of any home with the look of a beautiful, authentic-looking log cabin home. In our photos, you can see the patented, crisscrossing solid log corners that create the appearance of rustic, old-fashioned log cabin homes.

Converting a mobile home into the real property is a three-step process: 1) install the mobile home on a permanent foundation and remove the tires and any other means of transport; 2) surrender the title for the mobile home by filing the DMV form, Affidavit For Manufactured Home Conversion to Real Property and; 3) ...